Model 9009 - ISO-14230 to USB Converter
The 14230/USB Converter allows a personal computer to act as a diagnostic analyzer during development and testing of an automotive ECU (electronic control unit) that supports the ISO-14230 diagnostic interface. This Converter is compatible with Keyword Protocol 2000.
The 14230 Converter connects to a personal computer's USB port. It contains a built-in microcontroller that handles ISO-14230 initialization programmable for either 5-baud or fast initialization. Once the connected ECU has been initialized, the 14230 Converter communicates with the ECU at 10,400 bps. The 14230 Converter optionally supports the L-line, during initialization, as well as the K-line. It contains a programmable load resistor and wide-range power supply, allowing operation at either 12 VDC or 24 VDC in accordance with ISO-14230 specifications.
The 14230 Converter comes with a PC program that allows you to initialize a connected ECU, to send messages using the ISO-14230 protocol, and to receive messages. While not a complete ISO-14230 protocol stack, this PC software greatly eases the task of developing and testing a Keyword Protocol 2000 ECU.
The 14230-OBD cable connects the Model 9009 converter to a standard J1962 diagnostic connector.
Features:
- Compatible with ISO14230 diagonostic bus
- For car and truck 12V and 24 V systems
- Dual internal microcontrollers handle USB and ISO-14230 protocols
- ISO-14230 data rate from 1,000 to 10,417 bps
- Includes USB cable to connect to PC USB port
- ISO-14230 Message Center Software runs on connected PC
- Visual Basic 6.0 source code provides a head start to creating custom PC software to communicate with ECU
- Use the 14230-OBD cable to connect to a standard J1962 diagnostic connector
| File | Link |
|---|---|
| User's Manual | Download |
| Programmer's Reference Manual | Download |
| PC Software | Download |
| Software release notes | Download |